List of publications last updated July 2018. Hyperlinks to articles are also provided for your convenience. You can also refer to my Google Scholar account for links and citation counts.

Journal Publications

Student authors are bolded

  1. Tomlinson, D.G., Moradi, F., Hajiloo, H., Ghods, P., Alizadeh, A., and Green, M. (2017) “Early Age Electrical Resistivity Behaviour of Various Concrete Mixtures subject to Low Temperature Cycling.” Cement and Concrete Composites, 83, 323-334.
  2. Tomlinson, D.G., and Fam, A. (2016) “Analytical Approach to Flexural Response of Partially Composite Insulated Concrete Sandwich Walls used for Cladding.” Engineering Structures, 122, 251-266.
  3. Tomlinson, D.G. and Fam, A. “The Axial Load-Bending Moment Interaction Diagram of Partially Composite Precast Concrete Sandwich Panels.” ACI Structural Journal (Accepted June 2016)
  4. Tomlinson, D.G., and Fam, A. (2016) “Analysis and Parametric Study of Partially Composite Precast Concrete Sandwich Panels under Axial Loads.” Journal of Structural Engineering. 142(10), 04016086.
  5. Teixeira, N, Tomlinson, D.G., and Fam, A. (2016) “Precast Concrete Sandwich Panels with Bolted Angle Connections Tested in Flexure under Simulated Wind Pressure and Suction.” PCI Journal, 61(4), 65-83.
  6. Tomlinson, D.G., Teixiera, N., and Fam, A. (2016). “New Shear Connector Design for Insulated Concrete Sandwich Panels using Basalt Fiber Reinforced Polymer Bars.” Journal of Composites for Construction. 20(4), 04016003.
  7. Tomlinson, D.G., and Fam, A. (2015). “Flexural Behavior of Precast Concrete Sandwich Wall Panels with Basalt-FRP and Steel Reinforcement.” PCI Journal, 60(6), 51-71.
  8. Tomlinson, D.G., and Fam, A. (2015). “Combined Loading Behavior of Basalt-FRP Reinforced Precast Concrete Insulated Partially-Composite Walls.” Journal of Composites for Construction, 20(3), 04015060.
  9. Tomlinson, D.G., and Fam, A. (2014). “Performance of Concrete Beams Reinforced with Basalt-FRP for Flexure and Shear.” Journal of Composites for Construction, 19(2), 04014036.
  10. Tomlinson, D.G., and Fam, A. (2014). “Experimental Investigation of Precast Concrete Insulated Sandwich Panels with GFRP Shear Connectors.” ACI Structural Journal, 111(3), 595-606.
  11. Woltman, G., Tomlinson, D.G., and Fam, A. (2013) “Investigation of Various GFRP Shear Connectors for Insulated Precast Concrete Sandwich Wall Panels.” Journal of Composites for Construction, 17(5), 711-721.

Conference Publications

Student authors are bolded. Presenter is underlined.

  1. Shahi, M., and Tomlinson, D.G. (2018). “Behaviour of Fibre Reinforced Polymer Reinforced Concrete Beams with Fibre Mesh Shear Reinforcement.” 6th International CSCE Structures Specialty Conference, Fredericton, NB.
  2. Tomlinson, D.G., and Fam, A. (2017). “Response of Flax-FRP Skinned Foam Cored Tubes to Axial Loads.” 6th Asia-Pacific Conference on FRP in Structures, Singapore.
  3. Tomlinson, D.G., and Fam, A. (2017). “Effect of FRP Connector Size and Insertion Angle on Shear Transfer in Precast Concrete Insulated Wall Panels.” 6th Asia-Pacific Conference on FRP in Structures, Singapore.
  4. Tomlinson, D.G. (2017) “Electrical Resistivity Responses of Young Normal Strength Concrete Mixes under Temperature Cycling.” 5th International Engineering Mechanics and Materials Conference, Vancouver.
  5. Tomlinson, D.G., and Fam, A. (2016) “Load Bearing Precast Concrete Sandwich Panels Reinforced by Basalt-FRP Reinforcement and Shear Connectors.” Advanced Composite Materials in Bridges and Structures 7, Vancouver, BC.
  6. Tomlinson, D.G., Garcia, J., and Fam. A. (2016) “Flexural Behaviour of Flax-FRP Wrapped Foam Tube Structures for Lightweight Construction.” 5th International CSCE Structures Specialty Conference, London, ON.
  7. Tomlinson, D.G., and Fam, A. (2015). “Load-Bearing Precast Concrete Sandwich Wall Panels with Basalt-FRP Reinforcement and Ties.” 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures, Nanjing, December 14–16.
  8. Tomlinson, D.G., Teixiera, N., and Fam, A. (2014) “Comparison of Steel and Basalt-FRP Angled Shear Connectors in Precast Concrete Sandwich Wall Panels.” 60th Annual PCI Convention and National Bridge Conference, Washington, DC.
  9. Woltman, G., Hanna, M., Tomlinson, D.G., and Fam, A. (2011) “Thermal Insulation Effectiveness of Sandwich Concrete Walls with GFRP Shear Connectors for Sustainable Construction.” Conference on Durability of Composites for Construction, Quebec City, QC.
  10. Woltman, G., Tomlinson, D.G., and Fam. A. (2010) “A Comparative Study of Various FRP Shear Connectors for Sandwich Concrete Walls.” The 5th International Conference on FRP Composites in Civil Engineering, Beijing.

Thesis

Tomlinson, D.G. (2015) “Behaviour of Partially Composite Precast Concrete Sandwich Panels subject to Flexural and Axial Loads.” PhD Thesis. Queen’s University, Kingston, ON.

Professional Affiliations and Committees

2018 to present             American Society of Civil Engineering Journal of Composites for Construction: Member of the International Editorial Board

2018 to present             Canadian Society for Civil Engineering. Currently: Chair of the Composite Materials Subcommittee of the Engineering Mechanics and Materials Group.

2016 to present             Canadian Society for Civil Engineering. Currently: Member of the Advanced Composite Materials Subcommittee of the Structures Group

2013 to present             Precast/Prestressed Concrete Institute.

2012 to present             American Concrete Institute. Currently: Member of Committee 440 “Fiber Reinforced Polymer Reinforcement, Voting Member of Subcommittee 440-H “FRP Reinforced Concrete”, and Voting Member of Subcommittee 440-J “FRP Stay in Place Forms”

Professional Experience

2016 to present:            Assistant Professor, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB

2015 to 2016                 NSERC CREATE Sustainable Engineering in Remote Areas (SERA) Post-Doctoral Fellow, Queen’s University, Kingston, ON.

2013 to 2016                 Canada Foundation for Innovation Project Manager “Moving Load Facility for Bridge Assessment and Durability”, Kingston, ON.